Key Points for Inspection of the Door Lock Device of the Outdoor Large Ferris Wheel

Key Points for Inspection of the Door Lock Device of the Outdoor Large Ferris Wheel

1. Outdoor large ferris wheel gondola


The gondola of the outdoor large Ferris wheel is an important carrier for tourists to reach high altitude to enjoy the sightseeing and entertainment experience. According to the shape of the gondola, the common ones are cylindrical gondola, square gondola, spherical gondola, olive gondola, cylindrical gondola, etc.


Depending on the shape of the gondola, there are gondola doors and gondola door locks in various structural forms that match them. It is an outdoor large-scale Ferris wheel car door lock device manually operated and locked by an operator.


The door locking device adopts two locking devices, one of which uses a striker on the door handle to lock the cabin door; the other locking device is to install a bolt (or Buckle), play a backup (secondary) protection role.


Whether the door lock device of the outdoor large Ferris wheel is safe and reliable is closely related to the safe operation of the outdoor large Ferris wheel equipment. Therefore, the door lock device of the gondola is the part that must be paid attention to when inspecting the outdoor large Ferris wheel equipment.


Ⅱ. Pay attention when checking the door lock device of the outdoor large Ferris wheel car


The following points should be paid special attention (including but not limited to):


1. The door lock device of the outdoor large Ferris wheel must have two locking devices or one locking device with insurance.


2. Passengers cannot open the door lock device of the outdoor large Ferris wheel car inside the car.


3. The door lock device of the outdoor large Ferris wheel car is safe and reliable, and can resist the thrust exerted by passengers from the cabin to the outside.


4. The door lock device of the outdoor large Ferris wheel car locked by the operator should be convenient for the operator to lock and operate.


5. The operator should manually check each locking device one by one every day, and sense the judgment that it can be locked.


6. The repair personnel should be notified in time for inspection and repair of the found problems. The locking device after the repair of the Ferris wheel should be inspected and tested, and it can be put into operation after it is confirmed to be qualified.


Our company is an amusement equipment manufacturing enterprise specializing in the design, production and maintenance of Ferris wheels. Over the past three decades, JUMA has grown rapidly and has become the largest Ferris wheel manufacturer in China with hundreds of employees.


JUMA believes that quality and safety are the top priorities of the business and obtained the national special equipment manufacturing, installation, transformation, repair and maintenance license (level A). Up to now, 0 quality problems have occurred, which reflects our tenet of "quality as the goal and customer satisfaction as the guide". If necessary, welcome to consult.